Difficulty
Easy
Steps
4
Time Required
00:05:00 - 24:00:00
- How to use the Ultimaker 4 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Introduction
This guide assumes that you have exported an STL from your preferred CAD program.
Tools
Parts
No parts specified.
-
-
Open your STL file in the Ultimaker Cura
-
Set scaling (ex. half size) , position (on the printer), support settings (support you print), raft settings (makes it easier to print and remove print), fill settings (thickness of the walls) See video for more info
-
Insert an SD card into your computer and export your .gcode to your SD card
-
Note: You cannot use this .gcode file for any other 3D printers
-
-
-
Enter SD card into slot. Then turn Ultimaker on.
-
If tape on baseplate is broken or damaged replace the tape. Make sure that the tape is level.
-
Using the menu navigate to Print --> yourFileName
-
-
-
Make sure that your printer filament is the color you want.
-
To change the color of the filament follow the steps in Material --> Change
-
-
-
The Makerbot will present a complete screen
-
After, carefully remove print with a spatula
-
Replace tape on baseplate if needed
-
